The PSP is subject to smudges and scratches during
the normal course of use. To prevent scratches on
the PSP screen, Hori ships a thin and flexible
plastic film which is placed directly over the LCD.
Before installing the filter, we recommend cleaning
the PSP screen with a slightly damp, lint-free cloth
to rid it of any dust and/or fingerprints.
Technique
1) Clean the PSP screen as mentioned above
2) Once dry, remove the backing from the Hori screen
filter and hold it by the edges.
3) Place one corner of the filter to the
corresponding PSP screen corner and slowly, slowly,
slowly lay it all down.
4) The slow application helps to prevent air
bubbles. As you lay the screen down, you may also
rub the top of the filter with the included cloth as
it hits the screen to push out any potential air
bubbles.
5) If air bubbles do appear after application, use
the cloth to rub them out.
The Hori Screen Filter is not a permanent fixture
and may be easily removed and then reapplied as
necessary.
Please note that NCS will ship the
screen protector to U.S. customers with regular
first class mail in a padded envelope at a shipping
cost of 0.83 (2.2 oz mail piece) if ordered alone.
Please disregard what the checkout shipping cost is,
since we cannot edit it to show 0.83.
If you reside outside of the USA, we will still ship with the
lowest cost possible in a normal padded letter.
